Bed Ramps - Ford F-150 Owner's Manual

Stowing the Step
E167269
Push the step under your vehicle with your
foot until it fully latches. Do not push on
the button while stowing the step.

BED RAMPS

(If Equipped)
WARNINGS
When sliding the ramp up or down,
take care not to get your fingers or
hands caught in the mechanism.
Failure to follow this instruction could
result in personal injury.
Make sure that you correctly install
the ramp to the tailgate plate. Failure
to follow this instruction could result
in personal injury.
Do not step or sit on the ramp when
it is in the stowed position. Failure to
follow this instruction could result in
personal injury.
Only install the ramp within the
prescribed ramp angles. Failure to
follow this instruction could result in
personal injury.
Note: The ramp maximum capacity is
800 lb (363 kg).
Note: Verify the ramp is on stable ground
before usage.
F-150 (TFC) Canada/United States of America, enUSA, Edition date: 201607, Second Printing
Load Carrying
Note: For loading and unloading
equipment, your ramp should be set
between 10° upward and 26° downward to
avoid damage to the ramp claw and tailgate
plate.
Note: When using your vehicle for off-road
operation, remove the bed ramps from the
vehicle and store them in a safe location
away from your vehicle.
Using the Bed Ramp
1. Remove the front and rear cables.
E194380
2. Open the cam lever arms and unscrew
the cam bolts.
3. Remove the ramp from the ramp
holder.
E211150
4. Rotate the stops at the underside of
the ramp to the open position.
254