Ford F-150 Owner's Manual page 58

Note: Do not wipe off any grease on the
battery terminals or on the back surface of
the circuit board.
Note: Replacing the battery does not delete
the transmitter from the vehicle. The
transmitter should operate normally.
A message appears in the information
display when the remote control battery
is low. See General Information (page
109).
Integrated Keyhead Transmitter
The remote control uses one coin-type
three-volt lithium battery CR2032 or
equivalent.
Press the button to release the key before
beginning the procedure.
E191533
1. Insert a screwdriver in the position
shown and gently push the clip.
2. Press the clip down to release the
battery cover.
F-150 (TFC) Canada/United States of America, enUSA, Edition date: 201607, Second Printing
Keys and Remote Controls
E151799
3. Carefully remove the cover.
E151800
4. Insert a screwdriver as shown to
release the battery. Do not touch the
battery contacts or the printed circuit
board with the screwdriver.
E151801
5. Remove the battery.
55