Ford F-150 Owner's Manual page 60

Sounding a Panic Alarm
Note: The panic alarm only operates when
the ignition is off.
Press the button to activate the
alarm. Press the button again or
switch the ignition on to
E138624
deactivate.
Remote Start
(If Equipped)
WARNING
To avoid exhaust fumes, do not use
remote start if your vehicle is parked
indoors or in areas that are not well
ventilated.
Note: Do not use remote start if your vehicle
is low on fuel.
The remote start button is on the
transmitter.
E138625
This feature allows you to start your
vehicle from outside the vehicle. The
transmitter has an extended operating
range.
You can configure vehicles with automatic
climate control to turn on the automatic
climate control when you remote start your
vehicle. See Automatic Climate Control
(page 142). A manual climate control
system runs at the setting you set it to
when you switched off the vehicle.
Many states and provinces restrict the use
of remote start. Check your local and state
or provincial laws for specific requirements
regarding remote start systems.
The remote start system does not work if:
• The ignition is on.
• The alarm system triggers.
• You disable the feature.
• The hood is open.
• The transmission is not in P.
F-150 (TFC) Canada/United States of America, enUSA, Edition date: 201607, Second Printing
Keys and Remote Controls
• The vehicle battery voltage is too low.
• The service engine soon light is on.
Remote Control Feedback
An LED on the remote control provides
status feedback of remote start or stop
commands.
LED
Solid Green
Solid Red
Blinking Red
Blinking Green
Remote Starting the Vehicle
Note: You must press each button within
three seconds of each other. Your vehicle
remote starts only if you follow this
sequence.
E138626
The tag with your transmitter details the
starting procedure.
To remote start your vehicle:
1. Press the lock button.
2. Press the remote start button twice.
The exterior lamps flash twice.
57
Status
Remote start or
extension
successful
Remote stop
successful; vehicle
off
Remote start or
stop failed
Waiting for status
update