Bed Ramps - Ford 2016 F-150 Owner's Manual

Hide thumbs Also See for 2016 F-150:

Table of Contents

Deploying the Step

Push down on the button with your foot.

The step automatically extends from the

stowed position.

Stowing the Step

Push the step under your vehicle with your

foot until it fully latches. Do not push on

the button while stowing the step.

BED RAMPS

(If Equipped)

The slide action of the ramp is a

pinch point. Do not place fingers or

hands in the pinch point.

Extend and retract the ramp only

when connected to the tailgate

F-150 (TFC) Canada/United States of America, enUSA, Edition date: 08/2015, First Printing

Load Carrying

Note: The ramp maximum capacity is

800 lb (363 kg).

Note: Verify the ramp is on stable ground

before usage.

Note: For loading and unloading

equipment, your ramp should be set

between 10° upward and 26° downward to

avoid damage to the ramp claw and tailgate

Using the Bed Ramp

Remove the front and rear cables.

2. Open the cam lever arms and unscrew

the cam bolts.

3. Remove the ramp from the ramp

Be sure the ramp is installed

correctly when loading and

unloading equipment on and off the

Do not step or sit on the ramp when

it is in the stowed position.

Install the ramp only within the

prescribed ramp angles.