Using The Retractable Cup Holders; Positioning The Booster Seat And Securing Your Child - Britax parkway SGL User Manual

Using the Booster Seat

Using the Retractable Cup Holders

Pull the cup holder out from
the booster base to use.
IMPORTANT:
• DO NOT use with hot liquids.
• DO NOT step on or put excess weight on the cup holder.
22
Push the cup holder into the
booster base to store.

Positioning the Booster Seat and Securing Your Child

Positioning the Booster Seat and Securing Your
Child with Backrest and ISOFLEX
BEFORE YOU BEGIN:
9 Check that your vehicle has lower anchors.
9 If the vehicle seat back is adjustable, ensure it is in the upright
position before placing the booster seat on the vehicle seat.
9 Adjust the head restraint appropriately to fit child (see page 17).
NOTE: Before using the booster seat for the first time, you will need to
complete the assembly instructions on page 14.
Remove lower connectors from
1
the storage slots in the base
(Fig. A).
Push the ISOFLEX release button
2
on one side of the booster seat
and pull lower connector to fully
extend the ISOFLEX adjuster
strap. Then repeat on the
opposite side to ensure that all
slack has been released from the
ISOFLEX system (Fig. B).
Place the booster seat on the
3
vehicle seat.
* Ensure the booster seat is
positioned correctly on the
vehicle seat so that the vehicle
head restraint allows the
backrest to lie flat against the
vehicle seat back (Fig. C).
a
B
C
23