Vehicle Seat Belts; Vehicle Head Restraints; Incompatible Vehicle Seat Belts - Britax parkway SGL User Manual

Vehicle Compatibility

Vehicle Seat Belts

Vehicle seats and vehicle seat belts differ from
IMPORTANT:
vehicle to vehicle. Refer to your vehicle owner's manual for
specific information about vehicle seat belts and their use with
child seats. This booster seat can fit securely in most vehicles
using existing vehicle seat belts. However, some vehicles
do not have seating positions which are compatible with this
booster seat or any other child restraint. If in doubt, contact the
vehicle manufacturer for assistance.
To protect your child in a crash, you must use this booster seat
with vehicle seat belts that are compatible. This booster seat
can only be used with three-point (lap-shoulder) vehicle seat
belts. The vehicle owner's manual will have information on
the types of vehicle seat belts in your vehicle. If your vehicle
seat belt type is identified on page 11 as incompatible, select
another seating position.

Vehicle Head Restraints

Proper positioning of the booster seat may require adjusting or
removing the vehicle head restraint to allow the backrest to lie
flat against the vehicle seat back. If the vehicle head restraint
cannot be adjusted or removed, a different seating position or
different booster seat should be used.
NOTE: Compatibility with Inflatable Seat Belts
This booster seat may not be compatible with every inflatable
lap-shoulder belt found in all vehicle makes and models.
See FAQs in the support section of the BRITAX website, for
additional instructions.
10

Incompatible Vehicle Seat Belts

WARNING! The following types of vehicle seat
belts are NOT compatible with this booster seat:
Vehicle seat
1
belts with top or
bottom anchor
points on the
vehicle door.
Lap only belts.
3
Vehicle Compatibility
Motorized,
2
automatic
vehicle seat
belts.
11