Care And Maintenance; Cover Removal - Britax parkway SGL User Manual

Positioning the Booster Seat and Securing Your Child
6 Verify the vehicle seat belt is not
twisted and then fasten across the
child (Fig. C).
7 Route the lap part of the vehicle seat
belt through the SecureGuard clip
(Fig. D).
* The lap part of the vehicle seat belt
should rest low on the child's upper thighs.
8 Remove slack from the vehicle seat
belt.
* Proper positioning is achieved when the
shoulder belt lies across the center of
the child's chest and is positioned at or
above the child's shoulder.
Checklist
9 Vehicle seat belt is not twisted.
9 Vehicle seat belt is securely fastened.
9 Lap part of the vehicle belt is routed through the SecureGuard clip
and rests low on child's upper thighs.
9 Vehicle seat belt is properly positioned.
32

Cover Removal

Removing the Booster
Backrest Cover
1
C
2
3
NOTE: Be careful not to damage the
EPS foam.
Removing the Booster Head
Restraint Cover
1
D
2
NOTE: 2 elastic loops attach to the
front of the backrest.
3
Removing the Booster Base
Cover
1
2
3
Detach plastic clips (2 total) from
the backrest (Fig. A).
Detach the elastic loops (4 total)
from the backrest (Fig. A).
Remove the backrest cover.
Detach the plastic retainer clips
(2 total) from the headrest (Fig. B).
Detach elastic loops (6 total) from
the headrest (Fig. B).
Remove the head restraint cover.
Detach the elastic loops (2 total),
and plastic retainer clips (4 total)
from the booster seat base
(Fig. C).
Slide the plastic retainer flap
(1 total) from the front of the
booster seat base (Fig. C).
Remove the booster base cover.

Care and Maintenance

a
B
C
33