Positioning The Booster Seat And Securing Your Child Without Backrest And With Isoflex - Britax parkway SGL User Manual

Positioning the Booster Seat and Securing Your Child
Positioning the Booster Seat and Securing Your
Child without Backrest and with ISOFLEX
BEFORE YOU BEGIN:
9 Check that your vehicle has lower anchors.
9 If the vehicle seat back is adjustable, ensure it is in the upright
position before placing the booster seat on the vehicle seat.
9 Ensure the booster seat is positioned in a location that has a
vehicle head restraint.
NOTE: Before using the booster
seat without backrest, you may need
to complete the backrest removal
instructions on page 15.
Remove lower connectors from
1
the storage slots in the base
(Fig. A).
Push the ISOFLEX release
2
button on one side of the
booster seat and pull lower
connector to fully extend the
lSOFLEX adjuster strap. Then
repeat on the opposite side to
ensure that all slack has been
released from the ISOFLEX
system (Fig. B).
Place the booster seat on the
3
vehicle seat.
* Ensure the booster seat is
positioned correctly on the
vehicle seat (Fig. C).
26
a
B
C
Positioning the Booster Seat and Securing Your Child
Verify the ISOFLEX adjuster
4
straps are not twisted and push
the lower connectors onto their
adjacent lower anchors (Fig. D).
A click confirms attachment.
* Using the lower anchor farthest
from you first will allow for easiest
positioning.
* You may need to turn the back
of the booster seat towards you
for easier access to the lower
anchors.
NOTE: If a click is not heard when
connecting the lower connectors, the
ISOFLEX adjuster strap may be twisted
or there may be debris in the lower
connector. Correct either situation before
continuing with the positioning process.
Guide the seat into place while
5
pulling the ISOFLEX adjuster
strap on either side of the
booster to remove slack (Fig. E).
* Only tighten until the slack is
removed from the ISOFLEX
adjuster strap.
* Verify the booster seat is
compatible with your vehicle
(see page 10).
D
E
27