Table of Contents
Advertisement
Application Overview
The VeriColor Spectro application consists of four menus and five application modes. The
menus are located at the top and the mode bottoms are at the bottom of the application.
Menus
•
File – used to exit the application and launch a language translation tool (if activated
in Admin)
•
Instrument – used for testing, calibrating and targeting of the VeriColor Spectro
•
Admin – used to configure the default settings for the application
•
Setup - used to create palettes and standards
Application Modes
•
Verify – used to find the closest stored standard to a measured sample
•
Project – used to create projects
•
Lookup – used to auto select a standard from a palette
•
Compare – used to compare stored or measured trial and standard data
•
Monitor - used to monitor sample measurements after the system is set up
Refer to the VeriColor System Operation section that follows for detailed information on
setting up the software and using the VeriColor Spectro with the software application.
V E R I C O L O R
®
S P E C T R O
19
Advertisement
Table of Contents
