Variables - CipherLab 8000 User Manual

1.14.2 VARIABLES

"Variables" element is only available when the data collecting form isn't referring to any
lookup file. For "Variables" element, you set an input field to either admit the data read
or fetch some other data collected by the proceeding form.
The following describes how "Variables" function:
When an input field is set to "set V1", the data admitted can be fetched by an input
field set to "get V1" in the succeeding form.
When an input field is set to "get V1", it fetches the value in the input field set to
"set V1" in the direct preceding form.
When an input field is set to "get&set V1", it fetches the value from an input field
set to "set V1" in the preceding form and sets the fetched value to the new variable
that is to be fetched by the succeeding from. This selection is applicable when a data
needs to pass over to the next form.
Examples:
Select "set v1" for input field #1 of form 1, and its input data will be saved in the
first character array.
Select "get v1" for input field #3 of form 2, it will fetch the data in field #1 of form 1
automatically.
Select "get&set v1" for input field #3 of form 2, it will fetch the data in field #1 of
form 1 and is set to a new variable that can be fetched by the direct succeeding form.
Chapter 1 Form
61