CipherLab 8000 User Manual page 151

Convert to UPC-A
Transmit Check Digit
Transmit System
Number
Addon 2 / Addon 5
UPC-E1
UPC-E1 Triple Check
GS1 Formatting
GS1-128 (EAN128)
GS1 DataBar Family
Field Separator
Application ID Mark
The UPC-E barcode will be expanded into UPC-A, and the
next processing will follow the settings configured for
UPC-A.
After conversion, the data follows UPC-A format and is
affected by UPC-A
System Number, Check Digit).
Decide whether to include the UPC-E check digit in the
data being transmitted.
Decide whether to include the UPC-E System Number in
the data being transmitted.
Decide whether to decode UPC-E with supplementals.
Decide whether to apply read redundancy to the UPC-E1
barcode. If true, the same UPC-E1 barcode has to be read
three times to make a valid reading.
This is helpful when the barcode is defaced and
requires more attempts to read it successfully.
Decide whether to enable GS1 formatting for GS1-128.
Decide whether to enable GS1 formatting for GS1 DataBar
Family.
Specify the field separator.
Specify the application ID mark character.
Appendix II
programming selections
CCD/Laser Scan Engine
No
(e.g.
Yes
No
No
Disable
No
---
Disable
Disable
No
No
137