Symbology Settings Table (8300/8500) - CipherLab 8000 User Manual

FORGE Batch Application Generator

SYMBOLOGY SETTINGS TABLE (8300/8500)

LR/ELR Engine
Codabar
Transmit Start/Stop
Character
Select Length
Code 128
GS1-128
Replace Field
Separator
ISBT 128
Industrial 25 (Discrete 25)
Select Length
Interleaved 25
Convert to EAN-13
Verify Check Digit
Transmit Check Digit
Select Length
Code 39
Convert to Code 32
Verify Check Digit
140
User Guide
Description
Decide whether to include the start/stop characters in the
data being transmitted.
Any Length
One or two fixed lengths
Range (1~55)
Decide whether to replace the field separator. If the
barcode contains Field Separator "0x1D", it will be
changed to the desired Field Separator. For example, type
the desired character ";" (semicolon) as the new field
separator. Then if the barcode contains Field Separator
"0x1D", it will be changed to ";".
Any Length
One or two fixed lengths
Range (1~55)
Convert a 14-character barcode into EAN-13 if the
following requirements are met:
The barcode must have a leading 0 and a valid EAN-13
check digit.
Decide whether to verify the check digit. If desired, select
one of the algorithms below. If the check digit is incorrect,
the barcode will not be accepted.
No
USS algorithm
OPCC algorithm
Decide whether to include the check digit in the data being
transmitted.
Any Length
One or two fixed lengths
Range (1~55)
Convert to Italian Pharmacode.
Decide whether to verify the check digit. If the check digit
is incorrect, the barcode will not be accepted.
Default
Enable
No
Any Length
Enable
Enable
No
Enable
Enable
Any Length
Enable
No
No
No
Any Length
Enable
No
No