Table of Contents
Advertisement
S
ETUP
Mounting
Before mounting the product, read and follow the safety recommendations indicated in the
Orientation
The FXarray Q5 may be mounted in any position; however, make sure adequate ventilation is provided
around the product.
Rigging
•
Before deciding on a location, always make sure there is easy access to the product for
maintenance and programming purposes.
•
Make sure adequate ventilation is provided around the product.
•
Make sure that the structure or surface onto which you are mounting the product can support the
product's weight. (see the
•
When mounting the product overhead, always use a safety cable. Mount the product securely to a
rigging point, whether an elevated platform or a truss.
•
When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.
•
When power linking multiple products, mount the products close enough for power linking cables to
reach.
•
The bracket adjustment knobs allow for directional adjustment when aiming the product to the
desired angle. Only loosen or tighten the bracket knobs manually. Using tools could damage the
knobs.
Mounting Diagram
Safety Cable
(such as CH-05 from
Chauvet)
Bracket
Adjustment Knob
FXarray Q5 User Manual Rev. 1
Technical
Specifications)
Safety
Notes.
Mounting Clamp
(such as CLP-15 or CLP-15N
from Chauvet)
Mounting Bracket
Page 5 of 16
Advertisement
Table of Contents
