Operation; Control Panel Operation; Menu Map; Configuration (Dmx) - Chauvet FXarray Q5 Fxarray Q

Hide thumbs Also See for FXarray Q5:
Table of Contents

Advertisement

4. O
PERATION

Control Panel Operation

To access the control panel functions, use the four buttons located underneath the display. Please refer to
the
Product Overview
to see the button locations on the control panel.
B
UTTON
<MENU>
<UP>
<DOWN>
<ENTER>

Menu Map

M
P
ODE
ROGRAMMING
3Ch
DMX Mode
10Ch
30Ch
Static Colors
C--
Automatic
P--
Programs
Auto Speed
S--
Auto Dimmer
diM
Sound-Active
Snd
Mode
Custom
u--
Color Mixing
Infrared
SEt
Mode

Configuration (DMX)

The FXarray Q5 works with a DMX controller. Information about DMX is in the CHAUVET DMX Primer,
which is available from the Chauvet website
DMX_Primer_rev05_WO.pdf.

Starting Address

When selecting a starting DMX address, always consider the number of DMX channels the selected DMX
mode uses. If you choose a starting address that is too high, you could restrict the access to some of the
product's channels.
The FXarray Q5 uses up to 30 DMX channels, which defines the highest configurable address as 483.
If you are not familiar with the DMX protocol, download the DMX Primer from www.chauvetdj.com.
To select the starting address, do the following:
1.
Press <MENU> repeatedly until 3Ch, 10Ch, or 30Ch shows on the display.
2.
Press <ENTER>.
3.
Use <UP> or <DOWN> to select the starting address, from d 1–510.
4.
Press <ENTER>.
Page 6 of 16
F
UNCTION
Press to find an operation mode or to back out of the current menu option
Press to scroll up the list of options or to find a higher value
Press to scroll down the list of options or to find a lower value
Press to activate a menu option or a selected value
L
EVELS
d001–510
d001–503
d001–483
C 1–22
P 1–7
S 1–100
L 1–255
Snd1–5
r 0–255
g 0–255
b 0–255
u 0–255
S 0–100
on
oFF
http://www.chauvetlighting.com/downloads/
D
ESCRIPTION
3-channel DMX mode
10-channel DMX mode
30-channel DMX mode
Static Colors
Automatic programs
Program speed for P1–10
Quad LED dimmer for P1–5
Sound-active programs
Custom static colors
Combine red, green, blue, and UV
Note: Only three can be used at once
SMD strobe speed
Turns infrared on or off
FXarray Q5 User Manual Rev. 1
O
PERATION

Advertisement

Table of Contents
loading

Table of Contents