Assembling Your Espresso Machine Es 4010 - Catler 400 series Instructions For Use Manual

ASSEMBLING YOUR ESPRESSO MACHINE ES 4010

Your Espresso Machine will have the Drip
Tray, Storage Tray and Water Tank in place
when you unpack it from the box. The
stainless steel coff ee fi lters and the Cleaning
Tools will be packed in a plastic sleeve
with the jug in a box. The Filter Holder and
Tamping/Measuring Spoon will be packed
inside the foam packaging. Ensure you have
located all parts and accessories before
throwing out the packaging. Remove the
Drip Tray and Water Tank and wash all parts
and accessories in warm, soapy water using
a non-abrasive washing liquid. Rinse and dry
thoroughly.
To reassemble
Insert the Storage Tray into the base of the
machine and slide in towards the back wall
(Fig 1). This is a convenient location to store
the Cleaning Tool, stainless steel Filters and
Measuring/tamping Spoon when not in use,
so they are not misplaced.
Slide the Drip Tray, with the Drip Tray Full
Indicator and Grid in place, into the base
of the machine in front of the Storage Tray
(Fig 2) .
Slide the Water Tank over the Drip Tray and
into the front opening of the machine and
into position above the Storage Tray (Fig 3).
Ensure the Water Tank aligns fl ush with the
sides of the machine.
7
ASSEMBLING YOUR ESPRESSO MACHINE ES 4010
1
2
3