Create The Bubbles - SodaStream PLAY Drinks Maker Quick Start Manual

CREATE THE BUBBLES

1st
2nd
3rd
*When inserted correctly there is a gap between the bottom of the carbonating bottle and the base.
DO NOT CARBONATE if the carbonating bottle is resting on the base or the water will splash out.
8
1. Prior to making sparkling water, fill the
carbonating bottle with cold water up to the fill
line.
2. To insert the carbonating bottle, make sure that
the carbonating block is in its fully upward
Fill Line
position and the bottle rest is angled forward. If it
isn't already angled forward, pull it towards you
until it clicks. Do not pull the carbonating tube.
Insert the carbonating bottle neck into the Snap-
Lock. Push the bottle up and back. The Snap-Lock
mechanism will catch the bottle and hold it in a
vertical position.*
3. Push down the carbonating block, hold for 1-2
seconds and release. Wait for the carbonating
block to return to its fully upward position, then
repeat to obtain stronger levels of carbonation.
(See 'Carbonating Levels' section.)
4. When the desired level of carbonation is
achieved, with the carbonating block in its fully
upward position pull the bottle towards you to
release it from the Snap-Lock. Enjoy!
1st
3rd
2nd