Create The Bubbles - SodaStream FIZZI Quick Start Manual

CREATE THE BUBBLES

Fill line
1. Fill the carbonating bottle with cold water up to the fill line.
2. To insert the carbonating bottle, make sure that the bottle rest is angled forward. If it
isn't, pull it towards you until it clicks. Do not pull the carbonation tube. Insert the
carbonating bottle neck into the Snap-Lock. Push the bottle up and back.
The Snap-Lock mechanism will catch the bottle and hold it in a vertical position
suspended above the base.
3. Press the carbonating button all the way down with three presses of around two
seconds each. You should hear a puffing sound after the third press. Three presses
will create the normal level of carbonation. Additional presses will create a higher
level of carbonation. It is normal to hear a puffing sound with each additional press.
YOU MAY SEE SMALL
P I E C E S O F I C E
A P P E A R I N T H E
W AT E R D U R I N G
CARBONATION OF
VERY COLD WATER:
I f t h i s h a p p e n s ,
shorten the time of
each press until the
ice stops appearing
otherwise it can affect
the carbonation. Any
ice created will simply
melt.