The Handy THTS Operators Manual & Parts Lists page 9

STEP 6

Install the pivot and bracket assembly onto the lower handle using a M6x45 hex bolt and a M6
lock nut.

Now go back and tighten all the nuts and bolts, starting at Step 1.

Do not over tighten.
STEP 7

The upper handles have three positions for the operator's comfort. The upper handle can be
fitted to either of the two holes nearest the handle grip.

To fix, insert a hex bolt through the hole, the handle spacer and the other handle.
• Fix with a M6 lock nut.
• Do NOT tighten the nut yet.

Attach the gauge to the left hand side using M6x45 hex bolts & M6 lock nuts.

Tighten the lock nuts on the gauge first, then the handle.