Swisscom Aton CL117 Operating Instructions Manual page 30

Programming
Registering the DECT repeater
(Repeater RTX 4002) to the base unit
Note:
R Please use a repeater that has not yet been
registered to another unit. If the repeater is
registered to another unit, deregister it first,
referring to the Installation Guide for the
DECT repeater.
1
Base unit:
Press and hold M
(No registration tone)
R The next step must be completed
within 90 seconds.
2
DECT repeater:
Connect the AC adaptor, then wait until
the indicator and
green.
3
Base unit:
To exit the registration mode, press M
30
ATON_CL117(en-de)_0819_ver012.pd30
N for about 5 seconds.
indicator light
N.
30 2014/08/19 17:25:21