Swisscom Aton CL117 Operating Instructions Manual page 28

Programming
Important:
R When the unit receives a call from a
number that is stored in the call barred list,
the call is logged in the caller list
(page 31) with
disconnected.
Storing unwanted callers
You can store up to 50 phone numbers in the
call barred list.
Important:
R You must store the phone number with an
area code in the call barred list.
n From the caller list:
1
MCN ( )
2
MbN: Select the entry to be barred. a
M N
3
MbN: "Anr.-ID speich." a MOKN
4
MbN: "Anrufer sperren" a MOKN
5
MbN: "Ja" a MOKN a MeN
n By entering phone numbers:
1
M N#217 a M
2
Enter the phone number (24 digits
max.). a MOKN
R To erase a digit, press MCN.
3
MeN
Viewing/editing/erasing bar call
numbers
1
M N#217
2
MbN: Select the desired entry.
R To exit, press MeN.
3
To edit a number:
M N a Edit the phone number. a
MOKN a MeN
To erase a number:
M N a MbN: "Ja" a MOKN a MeN
Note:
R When editing, press the desired dial key to
add, MCN to erase.
28
ATON_CL117(en-de)_0819_ver012.pd28
after the call is
N
28
Setting call restriction
You can restrict selected handsets from
dialling certain numbers. You can assign up to
6 phone numbers to be restricted, and select
which handsets are to be restricted. Storing
area codes here prevents the restricted
handsets from dialling any phone number in
that area code.
1
M N#256
2
Enter the base unit PIN (default: "0000").
R If you forget your PIN, contact an
authorised service centre.
3
Select the handsets to be restricted by
pressing 1 to 6.
R All handsets registered to the base unit
are displayed.
R " " is displayed next to the selected
handset numbers.
R To cancel a selected handset, press
the same dial key again. " "
disappears.
4
MOKN
5
Select a memory location by pressing 1
to 6. a MOKN
6
Enter the phone number or area code to
be restricted (8 digits max.). a MOKN a
MeN
R To erase a restricted number, press
MCN.
Changing the base unit PIN
(Personal Identification Number)
Important:
R If you change the PIN, please make note of
your new PIN. The unit will not reveal the
PIN to you. If you forget your PIN, contact
an authorised service centre.
1
M N#132
2
Enter the current 4-digit base unit PIN
(default: "0000").
3
Enter the new 4-digit base unit PIN. a
MOKN
4
MbN: "Ja" a MOKN a MeN
2014/08/19 17:25:21