Getting Started
R Even if the handset is placed on the base
unit or charger, the feature can be
activated. You can talk without lifting up the
handset. If you want to perform further
operations, lift up the handset.
Note:
R While key lock is on (page 17), incoming
calls can be answered, but the following
feature is disabled even when the NR
indicator flashes slowly.
– View the caller list when there are
missed calls. (page 31)
Setting the Smart-Taste
The Smart-Taste for the following feature must
be "On".
– "Entgangener Anruf" (Default: Off)
The settings can be set for each handset.
1
M
N#278
2
MbN: Select the desired setting and press
M N.
R " " is displayed next to the selected
feature.
R To cancel a selected feature, press
M N again. " " disappears.
3
MOKN a MeN
Note:
R If the NR indicator flashes when the
handset is not placed on the base unit or
charger, battery consumption is faster than
usual.
One touch eco mode
When the handset is on the base unit, the
base unit transmission power is reduced up to
99.9 % if only one handset is registered.
Even when the handset is not on the base unit
or several handsets are registered, the base
unit transmission power in standby mode can
be reduced up to 90 % by activating one touch
eco mode.
You can turn on/off one touch eco mode by
just pressing MR/ECON. The default setting is
"Standard".
– When the one touch eco mode is on:
"Niedrig" is temporarily displayed and
14
ATON_CL117(en-de)_0819_ver012.pd14
instead of
– When the one touch eco mode is off:
"Standard" is temporarily displayed and
Note:
R When there is another cordless phone
nearby and it is in use, the base unit
transmission power may not be reduced.
R Activating one touch eco mode reduces the
range of the base unit in standby mode.
R If you set the repeater mode to "Ein"
(page 29):
– One touch eco mode is cancelled.
– "Eco Einstellungen" is not shown in
the display menu (page 24).
14
is shown on the handset display
.
goes off from the handset display.
2014/08/19
17:25:20
Need help?
Do you have a question about the Aton CL117 and is the answer not in the manual?
Questions and answers