Programming; Programmable Settings - Swisscom Aton CL117 Operating Instructions Manual

Programming

Programmable settings

You can customise the unit by programming the following features using the handset.
To access the features, there are 2 methods.
n Scrolling through the display menus
1
M N
2
Press MCN, MDN, MEN, or MFN to select the desired main menu. a MOKN
3
Press MCN or MDN to select the desired item from the next sub-menus. a MOKN
4
Press MCN or MDN to select the desired setting. a MOKN
R This step may vary depending on the feature being programmed.
R To exit the operation, press MeN.
n Using the direct command code
1
M N a Enter the desired code.
Example: Press M
2
Select the desired setting. a MOKN
R This step may vary depending on the feature being programmed.
R To exit the operation, press MeN.
Note:
R In the following table, < > indicates the default settings.
R In the following table,
R Display menu order and sub-menu may vary depending on your model.
Display the menu tree and direct command code table
Main menu: "Zeiteinstell."
Sub-menu 1
Datum/Uhr
*1
eingeben
Wecker
*1, *2
Zeitanpass.
Main menu: "Anruferliste"
Operation
Viewing the caller list.
22
ATON_CL117(en-de)_0819_ver012.pd22
N#101.
indicates the reference page number.
Sub-menu 2
–
1-3: Alarm1-3
–
22
Settings Code
– #101
1: Einmalig #720
2: Täglich
3: Wöchentlich
0: <Aus>
1: <Anrufer ID> #226
0: manuell
Code
#213
2014/08/19 17:25:21
13
26
–
31