8Sff Hard Drive Backplane - HP 780019-S01 Maintenance And Service Manual

Remove all hot-plug hard drives
5.
Disconnect all cables from the hard drive backplane.
6.
Remove the hard drive backplane.
7.
To replace the component, reverse the removal procedure.

8SFF hard drive backplane

To remove the component:
Power down the server (on page 16).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Do one of the following:
3.
Extend the server from the rack (on page 17).
o
Remove the server from the rack (on page 17).
o
Remove the access panel
4.
Remove all hot-plug hard drives
5.
Disconnect all cables from the hard drive backplane.
6.
("Hot-plug SAS/SATA drives and
("Access panel" on page 26).
("Hot-plug SAS/SATA drives and
SSDs" on page 22).
SSDs" on page 22).
Removal and replacement procedures 47