Dimm Slots; Non-Hot-Plug Pci Riser Board Slot Definitions - HP 780019-S01 Maintenance And Service Manual

DIMM slots

DIMM slots are numbered sequentially (1 through 12) for each processor. The supported AMP modes use
the letter assignments for population guidelines.

Non-hot-plug PCI riser board slot definitions

Primary riser cage connector, connected to processor 1 or the southbridge
1 - 3/4L/FH
2 - LP
3 - LP/3/4L/FH
*The server ships with one PCIe3 riser cage installed in the primary riser cage connector.
**The x16 PCIe3 riser cage is optional and can be converted to a FH riser. This conversion requires a
second processor to be installed.
Notes:
•
"Primary" denotes the riser cage is installed in the primary riser connector.
•
"Secondary" denotes the riser cage is installed in the secondary riser connector.
•
Installing the riser cages listed in the table above in either the primary or secondary riser connectors
determines the form factor of the PCI cards supported by those riser cages.
PCIe 3-slot riser cage
PCIe3 x16 (16, 8,4,2,1)
PCIe3 x8 (8,4,2,1)
PCIe3 x16 (16, 8,4,2,1)**
PCIe 2-slot x16 riser cage*
PCIe3 x16 (16,8,4,2,1)
PCIe3* x8 (8,4,2,1)
—
Component identification 81