Rear Panel Components - HP 780019-S01 Maintenance And Service Manual

Systems Insight
Display LED and
color
Power supply (amber)
Power cap (off)
Power cap (green)
Power cap (green)
Power cap (flashing
amber)
IMPORTANT: If more than one DIMM slot LED is illuminated, further troubleshooting is
required. Test each bank of DIMMs by removing all other DIMMs. Isolate the failed DIMM by
replacing each DIMM in a bank with a known working DIMM.

Rear panel components

Item Description
Slot 1 PCIe3 x16 (16, 8, 4, 1)
1
Slot 2 PCIe 3 x8 ( 8, 4, 1)
2
Slot 3 PCIe 3 x16 ( 16, 8, 4, 1)*
3
Power supply 2
4
Power supply 1
5
Video connector
6
NIC connector 4
7
NIC connector 3
8
NIC connector 2
9
NIC connector 1
10
System power
Health LED
LED
Amber Green
— Amber
— Flashing green
— Green
— Amber
Status
that power supply is in standby.
•
Power supply fault
•
System board fault
One or more of the following conditions may
exist:
•
Redundant power supply is installed
and only one power supply is functional.
•
AC power cord is not plugged into
redundant power supply.
•
Redundant power supply fault
•
Power supply mismatch at POST or
power supply mismatch through
hot-plug addition
Standby
Waiting for power
Power is available.
Power is not available.
Component identification 76