would vaporise as a result of the heat gener-
ated by the bulb, they will be deposited on
the reflector and will impair its surface.
Halogen headlights
Position of the bulbs
Fig. 94
Halogen headlights.
Turn signal
A
Main beam headlights
B
Dipped beam headlights
C
DRL (daytime running light)/side light
D
92
Emergencies
Main beam
Fig. 95
In the engine compartment: main
beam headlight bulb.
Raise the bonnet.
–
Turn cover
anti-clockwise and take it out
–
1
›››
Fig.
95.
Remove lamp connector
by pulling out-
–
2
ward.
Remove the bulb by pulling it out and fit
–
the new one.
Install the bulb connector
.
–
2
Fit cover
by turning it clockwise.
–
1
Check whether the new bulb is working.
–
Dipped beam headlight
Fig. 96
In the engine compartment: remove
the lid.
In the engine compartment: dipped
Fig. 97
beam headlight.
Raise the bonnet.
–
›››
Fig. 96
Move the loop
in the direction
–
1
of the arrow and remove the cover.
›››
Remove the bulb connector
–
Fig. 97
.
2