Folding down the back seat
Fig. 131
Folding up the rear seat cushion.
Fig. 132
On the rear seat backrest: release
catch
; red mark
.
1
2
Folding seat down
Remove the head restraint
–
Pull the front edge of the seat cushion
–
›››
Fig. 131
upwards in the direction of
1
the arrow.
138
Lift the cushion
–
tion of the arrow.
Push the unlock button
–
wards and at the same time lift the back-
rest. The rear seat backrest is not engaged
when the red marking of the button
visible.
Insert the head restraints in the spaces on
–
the rear of the seat cushion which are visi-
ble when the seat cushion is lowered.
Folding seat forward
Remove the head restraints from the
–
spaces in the seat cushion.
Lift the backrest, and before securing it, re-
–
place the head restraints in the seat cush-
ion, and then click the seat correctly onto
the locking rails. The red marking on button
should no longer be visible when the
2
backrest is properly secured.
Lower the cushion and push it backwards
–
below the seat belt buckles.
Press the front part of the cushion down-
–
wards.
On split rear seats*, the backrest and cush-
ion can be lowered and raised respectively in
›››
page
135.
two sections.
Operation
forwards in the direc-
2
›››
Fig. 132
for-
1
is
2
WARNING
●
Please be careful when folding back the
backrest! Injuries can be caused if the seat
height is adjusted without due care and at-
tention.
Do no trap or damage seat belts when rais-
●
ing the backrest.
●
After raising the backrest, check it has en-
gaged properly in position. Do this by pulling
on the central seat belt or directly on the
backrest and check that the position lever is
in the neutral position.
●
The three point automatic seat belt only
works correctly when the backrest of the cen-
tral seat is correctly engaged.