Seat Ibiza Owner's Manual page 213

Standby position
Standby position: Position of the lev-
Fig. 181
er and the release bolt.
Standby position adjusted properly
›››
Key Fig. 181 is in the released posi-
●
A
tion (the part of the key with the holes is fac-
ing upwards).
›››
● Lever Fig. 181 is in the bottom posi-
B
tion.
›››
● The release bolt Fig. 181
C
moved.
Towing bracket device
Thus adjusted, the detachable ball is ready
for installation.
CAUTION
The key cannot be removed or turned in the
standby position.
Assembling the detachable ball - Step
1
Fitting the detachable ball / Release
Fig. 182
bolt in the deployed position.
Fitting the detachable ball
Remove the hook housing cap
●
›››
Fig. 178 downwards.
Set the detachable ball to its standby posi-
●
›››
tion page 210.
Grip the detachable ball from below
can be ●
›››
Fig. 182 and insert it into the hook hous-
ing following the direction of arrow
engages audibly
Lever turns automatically in the direction
A
of arrow upwards, and the release bolt
2
moves outwards (the red and green part will
›››
be visible)
If lever does not turn automatically or the
A
release bolt
B
tachable ball should be removed by turning
the lever as far as possible downwards from
the housing cavity, and the detachable ball's
support surfaces and the cavity should then
be cleaned.
WARNING
● When attaching the detachable ball, keep
your hands well away from the reach of the
lever's rotation to avoid getting your fingers
caught.
● Never try to pull the lever upwards by force
to turn the key. The detachable ball would not
be secured properly!
4
until it
1
›››
.
B
.
does not come out, the de-
211