Seat Ibiza Owner's Manual page 83

The child seat has two rigid attachment clips,
called connectors. These connectors are fit-
ted into the ISOFIX attachment rings found
between the seat cushion and the backrest of
the vehicle's back seat (on the sides). ISOFIX
attachment systems are used mainly in Eu-
›››

rope page 18. If necessary, ISOFIX at-
tachment may have to be supplemented with
a Top Tether belt or a support bracket.
● Automatic three-point seat belt. Whenever
possible, it is preferable to attach the child
seats with the ISOFIX system rather than at-
taching them with an automatic three-point
›››

seat belt page 16.
Additional attachment:
● Top Tether: The Top Tether belt is guided
over the back of the rear seat and attached to
an anchor point with a hook. Anchor points
are located at the back of the rear seat back-
›››

rest on the boot side page
rings for retaining the Top Tether belt are
marked with an anchor symbol.
Support bracket: Some child seats rest on
●
the floor of the vehicle with a support brack-
et. The support bracket prevents the child
seat from tipping forward in the event of im-
pact. Child seats fitted with a support bracket
should only be used in the passenger seat
›››
and side rear seats . For the assembly of
this type of seat you should also consult the
list of approved vehicles for this assembly,
Transporting children safely
available in the instructions for child restraint
systems.
Recommended systems for attaching child
seats
SEAT recommends attaching child seats as
follows:
● Baby carriers or child seats in the opposite
direction of travel: ISOFIX and support brack-
et or iSize.
Child seats in the direction of travel: ISO-
●
FIX and Top Tether.
WARNING
Incorrect use of the support bracket can
cause serious or fatal injury.
● Make sure the support bracket is correctly
and safely installed.
21. The
81