Jumpers And Connectors - Advantech AIMB-705 User Manual

 consumption: Intel Core Intel I7-6700 @ 3.4 GHz; DDR4 8 G x 2
Maximum: +3.3 V @ 0.49 A, +5 V @ 3.13 A, +12 V @ 7.88 A, +5 Vsb @ 0.08 A,
-5 V @ 0.07 A, -12 V @ -0.07 A
 Board size: 304.8 x 228.6 mm (12" x 9.6")
 Board weight: 0.7 kg (1.54 lb)
1.4

Jumpers and Connectors

Connectors on the AIMB-705 motherboard link it to external devices such as hard
disk drives and a keyboard. In addition, the board has a number of jumpers that are
used to configure your system for your application.
The tables below list the function of each of the jumpers and connectors. Later sec-
tions in this chapter give instructions on setting jumpers. Chapter 2 gives instructions
for connecting external devices to your motherboard.
Table 1.1: Jumper list
Label
JCMOS1
JWDT1
PSON1
JUSB_2
JCASE1
JOBS1
JME1
Table 1.2: Connectors
Label
EATXPWR1
ATX12V1
DIMMA1
DIMMB1
SATA0 ~ 3
LAN1_USB3_34
LAN2_USB34
USB3_12
USB5
USB910
PCIEX16_1
PCIEX4_1
PCI1 ~ 5
VGA1+DVI1
COM12
COM3
COM4 ~ 6
AIMB-705 User Manual
Function
CMOS clear
Watchdog reset
AT(1-2) / ATX(2-3) mode selector
USB source switch between +5 V and +5 V_ DUAL for On Board
USB ports
Case open connector
HW monitor
Close: enable OBS alarm
Open: disable OBS alarm
Intel ME enable/disable
Function
ATX 24-pin main connector (for system)
ATX 12 V auxiliary connector (for CPU)
Channel A DIMM1
Channel B DIMM1
SATA III (Gen3)
LAN1 / USB 3.0 port 1, 2 stack connector
LAN2 / USB 2.0 port 1, 2 stack connector (LAN2 for G2 sku only)
USB 3.0 (pin header)
USB 2.0 (type A)
USB 2.0
PCIe x16 slot (Gen3)
PCIe x4 slot (Gen2)
PCI slot (32-bit/33 MHz)
VGA connector / DVI connector (DVI1 for G2 sku only)
Serial port: RS-232
Serial port: RS-232/422/485 (G2 sku only)
Serial port: RS-232 (G2 sku only)
4