1.10
Memory Installation Procedures
To install DIMMs, first make sure the two handles of the DIMM socket are in the
"open" position. i.e. The handles lean outward. Slowly slide the DIMM module along
the plastic guides on both ends of the socket, and then press the DIMM module right
down into the socket, until you hear a click. This is when the two handles have auto-
matically locked the memory module into the correct position of the DIMM socket. To
remove the memory module, just push both handles outward, and the memory mod-
ule will be ejected by the mechanism in the socket.
1.11
PCI Bus Routing Table
PCI Slot
IDSEL
INTA
INTB
INTC
INTD
AIMB-705 User Manual
PCI1
PCI2
AD27
AD28
INTB#
INTA#
INTC#
INTB#
INTD#
INTC#
INTA#
INTD#
10
PCI3
PCI4
AD29
AD30
INTD#
INTC#
INTA#
INTD#
INTB#
INTA#
INTC#
INTB#
PCI5
AD31
INTB#
INTC#
INTD#
INTA#