Removing the microphones
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1
Remove the
USB dongle-bay
2
Remove the
back
3
Remove the
system-board
4
Remove the stand.
5
Remove the
inner
Procedure
1
Disconnect the microphone cable from the system board and release it from the
routing guides on the middle frame.
2
Remove the four screws (M2X2.2) that secure the microphone module to the
middle frame.
3
Release it from the routing guides on the middle frame.
computer. After working inside your computer, follow
After working inside your
cover.
cover.
shield.
frame.
computer. For more safety best
www.dell.com/
Before
77