Replacing The Converter Board; Procedure; Post-Requisites - Dell XPS 27 Service Manual

Replacing the converter board

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

1 Align the screw holes on the converter board with the screw holes on the middle
frame.
2 Replace the three screws (M3X4) that secure the converter board to the middle
frame.
3 Connect the converter-board cable to the converter board.
4 Connect the backlight power cables to the converter board.

Post-requisites

1 Replace the I/O
2 Replace the inner
3 Replace the system-board
4 Replace the stand.
5 Replace the back
6 Replace the USB dongle-bay
computer. After working inside your computer, follow
After working inside your
panel.
frame.
shield.
cover.
cover.
computer. For more safety best
www.dell.com/
Before
99