Procedure - Dell XPS 27 Service Manual
Hide thumbs
Also See for XPS 27:
- Setup and specifications (29 pages) ,
- Quick start manual (2 pages) ,
- Owner's manual (117 pages)
Table of Contents
Advertisement
23 Remove the camera.
24 Remove the
system
25 Remove the
Display built-in self test button
Procedure
NOTE: The following steps are applicable only for non-touch systems.
1
Press the tabs on the cable to release it from the connector.
2
Disconnect the cable from its slot on the middle frame.
3
Press the tabs on the backlight cable.
4
Disconnect the backlight cable from its slot on the middle frame.
5
Open the latch and disconnect the display cable from its slot on the middle
frame.
6
Lift the display cable off the middle frame.
7
Remove the 7 screws (M3X4) that secures the middle frame to display.
board.
board.
123
Hide quick links:
Advertisement
Table of Contents
