Front Fan Assembly - Lenovo ThinkStation P710 User Manual

Front fan assembly

Attention: Do not open your computer or attempt any repair before reading and understanding the "Read
this first: Important safety information" on page v.
Note: The front fan assembly is only available on some models.
To replace the front fan assembly, do the following:
1. Prepare your computer. See "Preparing your computer and removing the computer cover" on page 61.
2. Pull the front fan assembly by the handle to slide it out of the computer chassis.
Note: When you slide out the front fan assembly, avoid pulling the front fan assembly cable.
Figure 48. Removing the front fan assembly
3. Disconnect the front fan assembly cable from the front fan connector on the system board.
4. Connect the cable of the new front fan assembly to the front fan connector on the system board. See
"Parts on the system board" on page 7.
.
Chapter 7 Installing or replacing hardware
83