Lenovo ThinkStation P710 User Manual page 113

7. Slide the storage drive bracket with the converter into the storage drive bay until it snaps into position.
Figure 81. Installing the type
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 133.
M.2 solid-state drive
To install or replace an M.2 solid-state drive on the flex adapter, do the following:
1. Prepare your computer. See "Preparing your computer and removing the computer cover" on page 61.
2. Lay the computer on its side for easier access to the flex adapter.
3. Locate and remove the flex adapter on which you want to install or replace an M.2 solid-state drive. See
"Flex adapter" on page 122.
4. Open the cover of the flex adapter.
Figure 82. Opening the cover of the flex adapter
2
storage drive bracket
.
Chapter 7 Installing or replacing hardware
101