Front fan assembly
Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
For access, remove the left side cover. See "Left side cover" on page 39.
Removal steps
Remove the front fan assembly.
NVLINK bridge
Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
Note: The NVLINK bridge is shipped in an accessary box within the computer carton box. You need to take
it out from the packaging and install it by yourself.
For access, do the following:
1. Remove the left side cover. See "Left side cover" on page 39.
2. Remove the CPU duct. See "CPU duct" on page 42.
Installation steps
Install the NVLINK bridge.
.
Chapter 5
CRU replacement
43