Replacing The Front Fan Assembly - Lenovo ThinkStation C30 User Manual

Hide thumbs Also See for ThinkStation C30:
Table of Contents

Advertisement

9. Insert the new mSATA solid-state drive into the mini PCI express card slot at an angle of about 20
degrees until it clicks into position. Then, carefully pivot the mSATA solid-state drive downward until it
snaps into position and is secured by the two tabs
Note: Do not touch the contact edge and circuit board of the mSATA solid-state drive.
Figure 35. Installing the mSATA solid-state drive
10. Reinstall any parts or reconnect any cables that you have removed.
11. Reinstall the front fan assembly. See "Replacing the front fan assembly" on page 56.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 65.

Replacing the front fan assembly

Attention:
Do not open your computer or attempt any repair before reading and understanding the "Important safety information"
on page v.
This section provides instructions on how to replace the front fan assembly.
To replace the front fan assembly, do the following:
1. Turn off the computer and disconnect all power cords from electrical outlets.
56
ThinkStation C30 User Guide
1
.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents