Louver Control - Fujitsu AUXB04GALH Service Manual

3-3 LOUVER CONTROL

(1) ADJUSTING THE DIRECTION OF AIR CIRCULATION
Instructions relating to heating ( ) are applicable only to heat pump type
outdoor unit.
Begin air conditioner operation before performing this procedure.
Vertical Air Direction Adjustment
This instructions are applicable to "LARGE CEILING TYPE",
"UNIVERSAL FLOOR/CEILING TYPE", "CASSETTE TYPE",
"WALL MOUNTED TYPE" and "COMPACT WALL MOUNTED TYPE".
Press the VERTICAL AIR FLOW DIRECTION SET button.
Press the VERTICAL AIRFLOW DIRECTION button.
The temperature display will change to the vertical airflow direction setting display.
Press the VERTICAL AIRFLOW DIRECTION button to change the vertical louvre position.
The position number will appear on the display.
Cooling & Dry : 1 , 2 , 3 , 4
Heating : 1 , 2 , 3 , 4
LARGE CEILING TYPE
UNIVERSAL FLOOR/CEILING TYPE
CASSETTE TYPE
Use the air direction adjustments within the ranges shown above.
The vertical airflow direction is set automatically as shown, in accordance with the type of operation selected.
During Cooling mode : Horizontal flow
During Heating mode : Downward flow
During AUTO mode operation, for the first minute after beginning operation, airflow will be horizontal
the air direction cannot be adjusted during this period.
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
1
4
(Large Wall mounted type:
03-10
Example : When set to vertical air direction.
COMPACT WALL MOUNTED TYPE
1
2
3
4
WALL MOUNTED TYPE
Adjustable Position (All Mode)
Position setting is available by only wiress remote controller
)
1 , 2 , 3 , 4 ,
,
1