Correcting Image Shape With Arc Correction - Epson EB-L260F User Manual

7. Press the arrow buttons to adjust the image shape as necessary. Press
area selection screen.
Note: You can also use the numeric buttons on the remote control to adjust the image shape. If one
of the directional arrows on the screen turns gray, you cannot adjust the shape any further in that
direction.
8. When you are finished, press Esc.
The Geometry Correction setting is now set to Quick Corner in the projector's Installation menu. If you
press the keystone adjustment buttons on the control panel, the area selection screen appears.
Parent topic:
Related references
Installation Settings - Installation Menu
Related tasks
Turning On the Projector

Correcting Image Shape with Arc Correction

You can use the projector's Arc Correction setting to adjust the curve or arc of the sides of your image.
Note: If you change the Screen Type setting or adjust the image position, your image adjustments are
reset.
Note: If you change the Screen Type or Screen Position settings, your image adjustments are reset.
Image Shape
108
Enter to return to the