BlacklineX
±0.0208 ms per click, or
±0.007 m per click, or
±0.023 feet per click
Turning these Controls clockwise increases the delay time, while turning them anti‐clockwise decreases the delay time.
The minimum and maximum delay ranges from:
0.0000 ms – 600.9984 ms
0.000 m – 204.339 m
0.000 feet – 670.233 feet
Press the ESC button [11] to exit delay editing mode.
High Pass Filter
High Pass Filters are utilized to set up crossovers in multi‐way loudspeaker and subwoofer systems. They may also be used to
roll‐off low frequencies that full‐range loudspeakers cannot efficiently reproduce.
Use the Edit2 [8] Control to change the frequency. Turning this control clockwise increases the frequency, while turning it anti‐
clockwise decreases the frequency. The frequency ranges from 20.0 Hz to 20.0 kHz.
Turn the Edit3 [9] Control to see the various filter type and slope options:
No Cut‐Off
Butterworth 6 dB
Butterworth 12 dB
Linkwitz‐Riley 12 dB
Bessel 12 dB
Butterworth 18 dB
Butterworth 24 dB
Linkwitz‐Riley 24 dB
Bessel 24 dB
Press the ESC button [11] to exit this edit mode.
Low Pass Filter
In conjunction with high pass filters, low pass filters are utilized to set up crossovers in multi‐way loudspeaker and subwoofer
systems. For example, in a 3‐way stereo system, use the high and low pass filters on the output feeding the mid‐range transducer
to define the range of frequencies it will reproduce. Combined with high and low pass filters on the outputs to the low and high
frequency transducers, you may divide the frequency spectrum so each transducer is reproducing the range for which it is best
suited, making the system sound its best and operate most efficiently.
Use the Edit2 [8] Control to change the frequency. Turning this control clockwise increases the frequency, while turning it anti‐
clockwise decreases the frequency. The frequency ranges from 20.0 Hz to 20.0 kHz.
Turn the Edit3 [9] Control to see the various filter type and slope options:
No Cut‐Off
Butterworth 6 dB
Butterworth 12 dB
Linkwitz‐Riley 12 dB
Bessel 12 dB
Butterworth 18 dB
Butterworth 24 dB
Linkwitz‐Riley 24 dB
Bessel 24 dB
Press the ESC button [11] to exit this edit mode.
Limiter
BlacklineX User Guide V1.0
USER GUIDE
40