BlacklineX
Wall Mounting
BlacklineX8, 10, 12 and 15 may be wall mounted either in portrait or landscape modes the wall brackets which are also
compatible with the CDD installation range. The Blackline X8 uses part number WB6/8B and Blackline X10, 12 and 15 uses part
number WB10/12B;‐
Do not forget that it is important to rotate the horn and badge through 90° when using a BlacklineX cabinet in "landscape
mode", please see the chapter on grille removal and horn rotation for details on how this is achieved.
Installation is a two part process in common with standard first fix / second fix procedures, installation using both sizes of
brackets is identical, the WB10/12 bracket is just larger than the WB6/8 version.
The first step is to separate the two halves of the bracket. There are two horizontally mounted nut and bolts holding the two
halves together. The upper one which sits in a curved slot does NOT need to be removed. Unscrew the lower bolt and the cabinet
bracket will lift off the wall bracket
BlacklineX User Guide V1.0
USER GUIDE
47