Grille Removal And Horn Rotation; Grille Removal - Martin Audio BlacklineX SERIES User Manual

BlacklineX
Grille Removal and horn Rotation
The BlacklineX Full range cabinets may be used in "landscape" or horizontal orientation, most obviously when used as a monitor
wedge but also when flown in fixed installations. For the speaker to perform correctly it is necessary to rotate the horn flare
through 90° to preserve the horizontal and vertical dispersion. The speakers are designed to make this as straightforward as
possible with spring‐loaded grilles which are easily removed and horns screwed in place with Pozidrive screws. It is also possible
to rotate the Martin Audio badge on the grille.
Grille Removal
Grilles on BlacklineX cabinets are designed to be easy to remove to facilitate driver rotation. No screws are used to hold them in
place; they are manufactured with a natural spring which holds them in place in slots in each side of the cabinets. The grilles
have two or three gaps in the sides into which an appropriately‐sized flat‐bladed screwdriver can be inserted to assist in removal.
Insert the screwdriver blade into one of the gaps ‐ either at the top or bottom of the cabinet.
BlacklineX User Guide V1.0
USER GUIDE
42