Software Version - Martin Audio BlacklineX SERIES User Manual

BlacklineX
3. The Enter Button [10] is used to enter and edit the chosen System Utility.
Press the Enter Button [10] to enter System Setup.
System Setup
System Setup is where the processor is configured for your particular loudspeaker system. It configures channel names, input
routing to outputs and provides starting points for crossover setups.
The five options are listed below. Here, turn the Edit2 [8] or Edit3 [9] Control to scroll between the different System Setup
choices.

2xStereo+Sub [default]
Two full‐range loudspeaker pairs and a pair of [mono by default] subwoofers

2x2Way+Sub
Two bi‐amp full‐range loudspeakers and a pair of [mono by default] subwoofers

2x3Way
Two tri‐amp full‐range loudspeakers

3xStereo
Three full‐range loudspeaker pairs

1x6Way
Mono 6‐way
Once you have decided on a system, press the Enter Button [10] twice: once to select and again to confirm. The outputs will
automatically mute once updated and the processor returns to the System Setup splash screen.
You may configure the DX0.5 for other scenarios by adjusting the available parameters. If you are creating a custom setup, choose
the setup that most closely resembles your system, then edit from there.
Press the ESC button [11] to return to the System Utility menu without making any changes.
Delay Units
This is where to choose units used when adjusting the input and output delay values. You will be presented with three options
here:

Unit : Time(ms)

Unit : Distance(m) [default]

Unit : Distance(feet)
Turn the Edit2 [8] or Edit3 [9] Control to scroll between these three choices. Press the Enter Button [10] once a unit of delay has
been decided. The processor will return to the Delay Units splash screen. Or press the ESC button [11] to return to the System
Utility menu without making any changes.
Ramps on changes
When engaged, sudden volume changes may be avoided when changing parameter values, particularly when using a Windows‐
based PC to control the unit. Disengage this feature for live applications since instant response to change is desired.
Turn the Edit2 [8] or Edit3 [9] Control to scroll between
the Enter Button [10] only once here. The processor will return to the Ramps on changes splash screen. Or press the ESC button
[11] to return to the System Utility menu without making any changes.
Software Version
Nothing may be edited on this page. Press the Enter Button [10] to view what version of software is installed in this DX0.5. Press
the Enter [10] or ESC [11] Button to return to the Software Version splash screen.
BlacklineX User Guide V1.0
USER GUIDE
Ramps : On Ramps : Off
and [default]. If changing, press
33