BlacklineX
System C‐ Adding a Mono Sub
Products that may be used with this wiring;‐
Blackline X8 plus X210
Blackline X8 plus X115
Blackline X8 plus X118
Blackline X10 plus X210
Blackline X10 plus X115
Blackline X10 plus X118
Blackline X12 plus X210
Blackline X12 plus X115
Blackline X12 plus X118
Blackline X15 plus X210
Blackline X15 plus X115
Blackline X15 plus X118
This system adds a single subwoofer and uses one of the Martin Audio four channel amplifiers for a neat solution avoiding having
to add a second amplifier. Channels A and B drive the two full range cabinets and channel C&D are used in bridge mode.
As with the previous system, there are left and right connections from the mixer to the input of the DX0.5. Output Channels 1
and 3 on the DX0.5 connect to inputs A and B on the amplifier using a pair of short XLR cables. A final XLR cable is connected
from output channel 5 on the DX0.5 to input C on the amplifier. The link switch for channels C & D must be depressed.
Speakon NL2 or NL4 cables go from the amplifier output channels A & B to the left and right full range speakers, and a Speakon
NL4 speaker cable goes from amplifier output C to the Subwoofer. Note that the wiring in the NL4 connecter at the amplifier
must be on pins 2+/‐ for bridge mode operation. See the User Guides for the MA2.8Q and 5.0Q for details of bridge mode
operation. These are available for download from the Martin Audio website.
BlacklineX User Guide V1.0
USER GUIDE
(DX0.5 Preset 2)
(DX0.5 Preset 3)
(DX0.5 Preset 4)
(DX0.5 Preset 6)
(DX0.5 Preset 7)
(DX0.5 Preset 8)
(DX0.5 Preset 10)
(DX0.5 Preset 11)
(DX0.5 Preset 12)
(DX0.5 Preset 14)
(DX0.5 Preset 15)
(DX0.5 Preset 16)
Recommended Amplifier MA2.8Q
Recommended Amplifier MA2.8Q
Recommended Amplifier MA5.0Q
Recommended Amplifier MA2.8Q
Recommended Amplifier MA2.8Q
Recommended Amplifier MA5.0Q
Recommended Amplifier MA5.0Q
Recommended Amplifier MA5.0Q
Recommended Amplifier MA5.0Q
Recommended Amplifier MA5.0Q
Recommended Amplifier MA5.0Q
Recommended Amplifier MA5.0Q
25