Dx0.5; Introduction; Features; Rear Panel - Martin Audio BlacklineX SERIES User Manual

BlacklineX
DX0.5
Introduction
Offering sophisticated EQ, crossover, dynamics processing and system protection, the Martin Audio DX0.5 Loudspeaker
Management System provides complete system optimization for both passive and powered systems. Five different operating
modes cover a wide range of systems. Each of the six outputs feature dedicated level control, mute, polarity invert, high / low‐
pass filters, 7‐band parametric / shelving EQ, 600ms delay and limiting. Two input channels provide independent level control,
mute, 600ms delay and a flexible 5‐band parametric / shelving EQ. The convenient front‐panel control also includes 7‐segment
LED metering per channel. The DX0.5 utilizes high‐end 24‐bit AKM® AD/DA converters with 120 dB dynamic range for class‐
leading sound quality. With 24 user‐definable presets and flexible I/O for simple routing and configuration, the DX0.5 is an ultra‐
flexible processor, ideal for a wide range of portable and permanent applications.
Features

Professional 2‐input, 6‐output system processor for passive and powered Loudspeaker systems

Sophisticated, intuitive EQ, crossover, delay and dynamics processing optimizes and protects your system

High‐end 24‐bit AKM® AD/DA with 120 dB dynamic range

Two balanced XLR inputs with level control, mute, 600ms delay and 5‐band parametric / shelving EQ

Six balanced XLR outputs with level control, mute, polarity invert, dedicated high and low pass filters, 7‐band parametric
/ shelving EQ, 600ms delay, and limiting

Powerful limiter on every output for ultimate protection

Convenient front‐panel controls for parameter editing and input / output muting

USB port for simple programming via PC

Linkable inputs and outputs for easy stereo configuration

7‐segment LED metering for input / output level or limiter activity

5 operating modes: 2 x stereo + sub, 3 x stereo, 2 x 2‐way + sub, 2 x 3‐way and 1 x 6‐way

24 presets for storing Martin Audio BlacklineX or other system parameters

Switch mode power supply: 100V – 240V

Compact, single rack unit design system controller may also be used as a simple equaliser and limiter for fully passive
full‐range
Rear Panel
1. Power
Use this rocker‐style switch to turn the unit on or off. The processor is on when the top of the switch is pressed in. It is off when
the bottom of the switch is pressed in. The LCD Display [6] will illuminate and text will appear when the power switch is on.
The DX0.5 remembers its settings, so you may power cycle the unit and it will resume operation using the same settings as
before. The DX0.5 employs relays on the outputs to prevent unwanted pops and noise in the system when power cycling and
starting up the processor. After engaging the power switch, the unit will initialize and the relays will switch. Any live outputs will
smoothly fade from silence to their configured output levels. The processor may now be edited, or it is ready for use if the DX0.5
is already configured for the loudspeaker system under control.
2. Power Lead Socket and Fuse
This is where to connect the detachable power cable included with the processor. Plug the other end of the power lead into an
AC outlet. The outlet should match the power cable.
BlacklineX User Guide V1.0
USER GUIDE
29