Set Up The Prefix Delegation And Router Advertisement - ZyXEL Communications ZyWALL 110 Handbook & Instructions

Set up the Prefix Delegation and Router Advertisement

This example shows how to configure prefix delegation on the ZyWALL's WAN and
router advertisement on the LAN.
Apply a network Prefix From Your ISP
First of all, you have to apply a network prefix from your ISP or the uplink router's
administrator. The WAN port's DUID is required when you apply the prefix. You can
check the DUID information in the WAN IPv6 Interface Edit screen.
This example assumes that you were given a network prefix of 2001:b050:2d::/48 and
you decide to
divide it and give 2001:b050:2d:1111::/64 to the LAN network. LAN1's IP address is
2001:b050:2d:1111::1/128.
Figure 350
Setting Up the WAN IPv6 Interface
1. In the Configuration > Network > Interface > Ethernet screen's IPv6 Configuration
section,
double-click the WAN interface.
2. The Edit Ethernet screen appears. Select Enable Interface and Enable IPv6.
Click Create new Object to add a DHCPv6 Request object with the Prefix Delegation
type.
Select Enable Auto-Configuration.
Select Client in the DHCPv6 field. (WAN1's DUID appears.)
www.zyxel.com
234/255