Download  Print this page

Suggestions; How Do I Configure Device Ha Pro In My Current Environment - ZyXEL Communications ZyWALL 110 Handbook & Instructions

Hide thumbs
Also See for ZyWALL 110 
User manual - 1090 pages
Handbook - 749 pages
User manual - 741 pages


Heartbeat Link
The heartbeat port is
After you have enabled Device HA Pro, the devices will transmit multicast
packets (UDP 694) to check each device's status.
When the passive device is working properly, the system LED light will be on.
Only the heartbeat port's LED light can be on.


(1) Transfer all of the licenses to the primary device. This helps to avoid the system from
recounting licenses every time.
(2) Enable the connectivity check function on the monitored interfaces. When an
interface doesn't receive any response from the remote server for a certain period of
time, the device will consider the interface status as fail. Then the Device HA Pro
feature will change the status of the interface.

How do I Configure Device HA Pro in My Current Environment?

Figure 340
1. License:
the latest physical port
on the device.


Table of Contents

  Related Manuals for ZyXEL Communications ZyWALL 110