ZyXEL Communications ZyWALL 110 Handbook & Instructions page 29

www.zyxel.com
Figure 38 CONFIGURATION > VPN > IPSec VPN > VPN Connection > Show
Advanced Settings > Policy
The GRE tunnel runs between the IPsec public interface on the Branch unit and
the HQ unit. Go to CONFIGURATION > Network > Interface > Tunnel > Add. Enter
the Interface Name (The format is tunnelx, where x is 0 - 3.). Enter the IP Address
and Subnet Mask for this interface. Specify My Address to be the interface or IP
address to use as the source address for the packets this interface tunnels to the
remote gateway. Enter Remote Gateway Address to be the IP address or
domain name of the remote gateway to this tunnel traffic.
Figure 39 CONFIGURATION > Network > Interface > Tunnel > Add
29/255