Set Up The Packet Capture Feature - ZyXEL Communications ZyWALL 110 Handbook & Instructions

www.zyxel.com

Set Up the Packet Capture Feature

9 Go to MAINTENANCE > Diagnostics > Packet Capture > Capture > Interfaces.
Select interfaces for which to capture packets and click the right arrow button to
move them to the Capture Interfaces list.
Figure 359
10 Go to MAINTENANCE > Diagnostics > Packet Capture > Capture > Filter.
Select IP Version (IPv4 or IPv6) for which to capture packets or select any to capture
packets for all IP versions.
Select the Protocol Type of traffic for which to capture packets. Select any to capture
packets for all types of traffic.
Select a Host IP address object for which to capture packets. Select any to capture
packets for all hosts. Select User Defined to be able to enter an IP address.
Figure 360
242/255